| |
|
|
| |
|
| |
|
|
| Can
be used with E-40, E-B/30, E-B/40, E-BB/30, E-BB/40
panels, with the a carbon fibre nucleus, in order
to place the raised access floor in heights ranging
from 6,5cm to 23cm. |
|
|
It is made up of a series of aluminium injected
elements which, stuck together without distinction,
facilitate the required height.
The height can be adjusted by rotating the head
with the base.
The head has 4 sideboards which
prevent the movement of the panel, incorporating
an auto-extinguishable vinyl joint which acts as
an acoustic muffler and facilitates a perfect seating
for the panel. This joint can have four rivets which
allows for the electrical continuity of the support.
The base, with a diameter of 115
mm, permits maximum stability in its entirety. It
has a blockage screw which prevents the rotation
of the head and base and the horizontal and vertical
movement of the support. It can resist mechanical
loads up to 10.000 kg (2.500 kg. security factor
4) without deformation.
Thanks to its design and resistance, the pedestal
avoids the formation of any type of dents or scratches
on the panels it carries, maintaining the raised
access floor stable through it's useful life.
|
|
|
|
|
